FURIA Amiga 600 accelerator (passive cooler)

FURIA for AMIGA 600

Commission is paid to creator of hardware for every unit sold

FuriaEC020 is an accelerator card for Amiga 600 computers designed by Boris Krizma (Slovak Amiga HW developer) It's equipped with CPU Motorola MC68EC020/25 (OC33) MHz and FPU Motorola MC68882/40 MHz, and with onboard 9.5 megs of fast memory. The quick access to the memory makes this little card a real monster, as it makes the Amiga more than 10 times faster, than the original Amiga 600.

The card has also ability to map ROM into the Fast RAM, tested with 256 kB, 512 kB and also 1024 kB ROMs. The card also speeds up Amiga 600 IDE port. The device can be easily controlled by tool FuriaTune software written by Martin Kuchinka. To enable support for onboard PCMCIA port, you need to remove 4 megabytes of Fast RAM by pressing Control+Amiga+Amiga for 3 seconds.

More INFO - HERE

IN THE BOX

• Furia accelerator card with passive cooler (heatsink)

Disclaimer:

• in order to obtain highest compatibility, original CPU by Motorola and DRAM chips were used. Chips are non produced nowadays but they are new old stock.
• Every card is tested with MBR2 test for 2 hours with heat-sink covered
• Furia needs really fast Compact Flash card to work properly. Please, check AmSider device; fully compatible with Furia and utilizing cheaper SD card

Features:

• CPU 68EC020/25 MHz (OC33)
• FPU 68882
• 9.5MB Fast RAM
• Maprom function
• PCMCIA friendly
• Highest quality PLCC bottom socket - stable and solid fit (AMPHENOL) - high temp resistant and heavy duty - different than other cards use, if you fit Furia on the CPU, you will be able to lift Amiga by holding by accelerator :)
• Firmware 14.3
• PCB colour may vary

Installation FAQs can be found here.

FuriaTune description is here. The tool is available for download in the Downloads tab above.